Technology news and Jobs
Science
Hubble doesn’t like Side B
Science
Hubble doesn’t like Side B | Hubble doesn’t like Side B |
|
| by William Atkins | |
| Sunday, 19 October 2008 | |
|
Page 1 of 2
On Friday, October 17, 2008, NASA scientists with the Hubble Space Telescope project stated that two new anomalies, which have occurred since the activation of Side B within its science control system, have again caused the telescope to suspend observing the universe.Featured Whitepaper
5 Best Practices for Smartphone Support
Science DiscussionsThe “Hubble Status Report #3” called “Hubble Science Operations Deferred While Engineers Examine New Issues” states that “The first event [anomaly] occurred at approximately 1:40 PM on Thursday [October 16] when the Advanced Camera for Surveys (ACS) suspended operations due to indication that one power source in the Solar Blind Camera’s low voltage power supply failed to turn on." And, "This was the first turn on of the Solar Blind Camera since its last use prior to the safing of HST’s NASA Standard Spacecraft Computer, version 1 (NSSC-1) on 9/27. (The NSSC-1 is Hubble’s science computer.) The Solar Blind Channel is the only part of ACS in use since a power failure in January 2007 halted most ACS science observations.” NASA began to investigate this first anomaly when another anomaly occurred. As reported by NASA, “During the briefing, at 5:14 PM, a still-undiagnosed problem affecting the Science Instrument Command and Data Handling (SI C&DH) system caused the NSSC-1 to stop issuing its keep-alive signal." And, "The Hubble spacecraft computer (HST486) detected the cessation of the keep-alive signal as a failure of its Processor Interface Table (PIT) toggle test." Further, "The absence of the keep-alive signal for twenty seconds told the HST486 to issue commands to safe HST’s science computer and science instruments.” The initial thoughts by Hubble investigators as to the cause of the problem is found on page two. |
| < Next story in category | Previous story in the category > |
|---|









